This program was developed to simplify parameter editing of the popular NEAX 2400/7400 M100/80 PBX (KSU).

With this Software you can program the popular NEAX 2400/7400 M100/80 PBX. Easy understandable interface and built-in installer's help-file let you to config and to program your PBX even without PBX Installation Manual.

Using this program you'll no longer have to use the cryptic command number system to set your PBX parameters. This will make configuring your PBX much easier in other ways as well, like being able to use a real keyboard to enter extension names. All parameters are grouped in a logical manner according to the function. A true lifesaver if your PBX has some type of failure causing it to lose programming or if you ever have to replace your PBX with another NEAX system. Since you can save your parameters to your computer, you can also work on the configuration anywhere that you can bring your computer. When you're ready to implement the changes, simply go to your phone room, connect your computer to the PBX and dump the new configuration to the system.

   System requirements.

In order to operate the program you will need PC-compatible computer, working under Windows 95/98/NT Program can not be used under the following operating systems:

• Windows 3.1/3.11
• Windows CE (i.e. at the 'on-palm' handheld computers)
• Apple Macintosh
• Linux, BSD, UNIX

After installation the program occupies about 1Mb of disk space of the computer.

   Cable Pinout

The applied scheme differs from widely-spread cable for hook-up of the external modem (null-modem cable is required in the case of programming), that is why you will have to buy the cable (and then to check its compliance with the scheme of the connection given below), or to make it over out of the ordinary modem cable (it is necessary to interchange the wires of 3 couples). Application of the ordinary 9x25 adapters together with the well soldered cable is allowed.